0845 009 7999

Additional Options

Access Equipment

Safety Harness

It is strongly recommended by IPAF (International Powered Access Federation) that a full body harness with an adjustable lanyard is used when working from a boom type mobile elevating work platform (MEWP).

Suitable harnesses and lanyards are available for sale.


Sandhurst Trackers can be discretely hidden on Access equipment providing peace of mind to hirers as they are designed to deliver a best of class high end tracking solution for a small weekly surcharge.


  • First Global Tracking System that will locate equipment inside or outside
  • Up to 2 Year Battery Life
  • No wires or aerials
  • Rugged Weatherproof casing for reliable operation
  • Designed to combat theft and technology used by thieves to jam standard GPS tracking devices
  • Discreet size makes installation simple, but detection almost impossible – 95mm x 45mm x 18mm
  • Weight 114g
  • Signal GSM/RF
  • Accuracy: Less than 1 metre
  • Homing beacon penetrates walls and containers
  • Network of investigators finds equipment if stolen
  • Tracker success helps avoid claiming on your insurance

Safety Barriers

A folding safety barrier system designed to be used around obstructions, manhole repairs, cable laying and other temporary excavations

Available in minimum 3 sections consisting of 3 x 750mm barrier lengths. Barrier height is 1000mm.

  • Compliant with Chapter 8 Streetworks
  • Individual barrier weight: 2 kg
  • Modular design can be assembled as per required configuration
  • Integral locking clamp to aid stability when the barriers are deployed in a straight line
  • Hinged clips enable fast assembly in 3-way or 4-way configurations
  • Tough: Made from HDPE (high density polyethylene)
  • Lightweight barriers
  • Simple installation
  • Modular design means the barrier can be configured in a number of different ways
  • Folds compactly for easy transportation and storage

Stabiliser Load Pads

Sandhurst rough terrain scissor lifts are equipped with additional stabilizers or outriggers (see diagram) allowing them to be placed on slightly sloped or rough ground while the platform is made horizontal before elevation to final position.

If stabilizers are deployed, it is recommended to use optional load pads to support stabilizer leg weight for greater safety.

Even if being used with stabilisers or outriggers, rough terrain scissors must not be used when sloping conditions or other factors jeopardize safe working conditions.

Operators must be knowledgeable in the use of stabilizers and outriggers, their intent and purpose, and how they work. Make sure machine is level and all supports are on a flat, sound surface.

Ladder Safety Foot

Ideal when working on solid flat surfaces, use one of our simple non-slip ladder safety foot devices to improve stability. Works by holding the ladder firm due to friction at the point of contact.

Safety is improved due to the weight of the ladder and its user being spread over a larger floor area.

Improves ladder stability on a variety of surfaces including: tiled floors, polished wooden floors, concrete surfaces and grass.